Manual irrigation is used to manually start schedules or stations. Both automatic schedules (Schedule Irrigation) and manual-only schedules (those with water days set to manual) can be started this way. Manual irrigation is allowed even when the controller is paused (Pause) or in rain shutdown (Rain Shutdown).
Press the MANUAL IRRIGATION button.
Select RUN STATIONS.
Use the OPTION soft button to select a runtime option.
• One at a Time: Each station in the list must complete its full runtime before the next station turns on.
• Simultaneous: Multiple stations, up to the power capabilities of the controller, will turn on at the same time.
Enter station (STA) or block (BLK) numbers with runtimes. Use the +/– buttons to choose STA or BLK. Use the COPY soft button to copy settings to the next line and automatically increment the station number.
Select the START soft button to turn on the station(s) or block(s).
- Station shut down screen will appear for a couple of seconds.
Press the MANUAL IRRIGATION button.
Select RUN SCHEDULES.
Enter the schedule number. If you do not want to run the entire schedule, enter the step within that schedule where you want watering to start.
Select the START soft button.
Press the QUICK VIEW button if the display is not already showing running stations, blocks, or schedules.
- Use the UP and DOWN buttons to move the station, block, pointer through the list of running stations until it points to the station you want to stop.
Select the STOP soft button. The station will turn off and be removed from the list of running stations.
Press the MANUAL IRRIGATION button then select RUN SCHEDULES.
- Enter the schedule number. Use the +/– buttons to quickly scroll through the available schedule numbers.
Select STOP.
Still need help? We're here.
Tell us what you need support with and we'll find the best solution for you.