Wireless Valve Linking Support

  • Overview
    The Wireless Valve Link enables wire-free valve control and monitoring for new, existing, and add-on valves in  ICC2 or HCC control systems. Get the WVL app to get started!   The
  • Download App
    The Wireless Valve Link enables wire-free valve control and monitoring for new, existing, and add-on valves in  ICC2 or HCC control systems.  Get the WVL app to get started! 
  • Wireless Valve Output Module
    The Hunter WVOM (Wireless Valve Output Module) or WVOM-E (international versions) is designed for installation in a compatible controller output module slot. The WVOM installs
  • Wireless Valve Link
    The Wireless Valve Link enables wire-free valve control and monitoring for new, existing, and add-on valves in  ICC2 or HCC control systems.  Get the WVL app to get started! 
  • Pump/Master Valve
    A master valve is an automatic valve that is installed at the point where the irrigation system connects to the main water supply. You can use the WVOM with a normally-wired Pump
  • Solar Powered Repeater
    The Repeater is designed for outdoor, solar-powered installation. It relays LoRa signals between Hunter wireless devices to extend wireless range and overcome obstacles to line-of
  • Solar Panel
  • Antenna Extension Kit
    The Universal Antenna Extension Kit is beneficial for improving line-of-sight wireless communication for Wi-Fi, cellular, and LoRa radio communications. This kit (ANT-EXT-KIT) is
  • Dashboard
    All WVOM/WVL information comes through the Bluetooth app. It is important to remember that the app is connected directly from the smartphone to the WVOM, but all field
  • Details
    Details will summarize the most recent information for each WVL in the system and the repeater if one is present. WVLs are reported together with their output station assignments.
  • General
  • Firmware
    The WVOM and the WVL models can be updated in the field, over the air (OTA), if new Firmware becomes available. Firmware updates are large downloads and can take up to 2 hours.
  • Security
  • Site Survey/Comm Check
    You can verify the radio coverage at the proposed installation/valve box site prior to installation.
  • Basic Troubleshooting
    All LoRa® radio communications between the Wireless Valve Output Module and the Wireless Valve Links (or Repeater) are two-way. Whenever the Wireless Valve Output Module sends a
  • Troubleshooting Chart
    Problem Causes Solution WVL Not Watering Dead batteries. WVL not addressed. Improper solenoid or solenoid disconnected. WVL is
  • Replacing the WVOM
    The Recovery Database feature is used when a WVOM must be replaced or exchanged with another device for service reasons. The replacement WVOM will have a different Site ID and
  • Compatible Solenoids
    Hunter prefers using Hunter valves with Hunter DC-latching solenoids (P/N #458200) for best performance. However, existing irrigation systems can be retrofitted with another
  • Factory Reset (WVL)
    Factory Reset is used to clear all programming out of a WVL controller, including station assignment, Site ID, and Channel ID.
  • Manual Solenoid Test
    This function will allow you to test the connected solenoid operation using the local manual start button in the battery compartment.
  • Parts List
    Item Description Catalog No. 1 Spare Plastic Parts Kit, WVL 10046600SP 2 Spare Ball Mount, RPT, SP-WVL, SP-NODEBT

Find Hunter