ACC2 - Smartport Replacement

The ACC2 has a preinstalled SmarPort® harness for using the ROAM/ROAMXL remotes. In the event this becomes damaged, this can be removed and replaced with a few simple steps. The replacement part number for this SmarPort® is 112200.

1. Shut the power Off using the toggle switch at the base of the transformer.
2. Remove the three Captive Screws from the power module using a Philips screwdriver (Fig. 1).
3. Remove the white SmarPort® Plug by pulling it outward.
4. Remove the 1/2" Locknut and slide the SmarPort® out from the controller.
5. Repeat the steps above to replace it with a new SmarPort®.

Find a Distributor