Welcome Page Body
In this support section you will learn how to install the HPC Face Panel and connect to Wi-Fi.
![](/sites/default/files/support_landing_hpc_2.jpg)
Section Menu
Installation
-
Mounting
Choose a suitable location with strong Wi-Fi coverage.Using a 3/ 16" drill bit, drill a hole and insert a plastic anchor.Insert a screw into the anchor, leaving 1/8" exposed.Slide
-
Connecting AC Power
The outdoor model HPC comes with a pre-installed plug to allow the controller to plug in to an outlet easily. In the event you need to hard wire (wire directly to 120 VAC), the
-
Retrofit Your Pro-C Controller
Ensure you have a strong Wi-Fi signal. Wi-Fi coverage can be easily tested using a smartphone. A signal strength of two or three bars is recommended. Wi-Fi connectivity can also be
Connecting to Wi-Fi
-
Connecting to Wi-Fi
From the Home screen, touch the Settings button and then the Wireless button.Select your wireless network from the list shown on the controller display and press the Confirm button
ROAM and ROAM-XL Compatible
-
ROAM and ROAM-XL Compatible
The HPC face panel quickly and easily upgrades Pro-C® controllers (PC400 models manufactured since March 2014) to next-generation smart controllers via the Hydrawise platform.It