Residential & Commercial Irrigation
Residential & Commercial Irrigation
One station: At any time you can simply increase or decrease Run Time to any individual station in the host controller and that station will adjust up and down with all the rest of the stations from a new level. All stations: Use the water + and - feature …
Module wires not properly connected to controller terminals. Wires from the Solar Sync module to the controller have been severed. Is the Solar Sync module installed on a controller that has the SOLAR SYNC dial position? If so, remove the module. … ERR …
If the Solar Sync Seasonal Adjustment is too high or too low you may need to change the Water Adjustment feature on your controller or Solar Sync Module on older models. This will allow you to fine-tune your station Run Times to allow for more watering or …
Cause The Solar Sync sensor is not connected to the controller The Solar Sync sensor wires may have a break in them or a bad connection Solution Connect the Solar Sync to the "SEN" positions on the wiring terminal - The display will then show the Region …
Cause The Solar Sync sensor is not connected to the controller The Solar Sync sensor wires may have a break in them or a bad connection Solution Connect the Solar Sync to the "SEN" positions on the wiring terminal - The display will then show the Region …