NOTE: Connecting the Pump Start Relay should only be done by a licensed electrician following local codes. Improper installation could result in shock or fire hazard.
1
To prevent electric shock, turn the main circuit breaker switch to “off” prior to making any electrical connections.
2
Assemble conduit piping and connect AC power from the power source to one side (LINE IN) of the relay.
3
Assemble conduit piping and connect wiring from the pump motor to the other side of the relay (LOAD OUT).
4
Check to make sure there are no exposed or loose connections.
По-прежнему нужна помощь? Мы к вашим услугам!
Изложите свой вопрос, и мы постараемся найти для вас оптимальное решение.