An irrigation system that is repeating the cycle and continuously watering most likely has too many start times programmed into the controller. This
Programming Odd & Even Days and Programming Interval Watering
This video will teach you how to program your controller to water every other day by selecting odd or even days of the week to water. You will also
Canceling a Delay on a Hunter Controller
One of the most common reasons for a sprinkler system to water intermittently and show the word DELAY on the display is because a delay time was
How to Reset a Hunter Controller
If want to clear the memory on your controller and start from fresh or if your controller is not responding to your commands, this video will show you
Controllers - Programming Multiple Programs Part 1 of 4: Introduction, Time/Date
Programming a controller is easy. You just need to program the current day and time and you are ready to create a program for your zones or stations. It
Controllers - Programming Multiple Programs Part 2 of 4: Program A
Programming a controller is easy. You just need to program the current day and time and you are ready to create a program for your zones or stations. It
Controllers - Programming Multiple Programs Part 3 of 4: Program B
Programming a controller is easy. You just need to program the current day and time and you are ready to create a program for your zones or stations. It
Controllers - Programming Multiple Programs Part 4 of 4: Other Modes
Programming a controller is easy. You just need to program the current day and time and you are ready to create a program for your zones or stations. It
Display Troubleshooting on a Hunter Controller
If your display is blank, unreadable, or if it is showing symbols that do not make any sense, this video will teach you how to troubleshoot the display.
Manual Operation with a Hunter Controller
Hunter controllers allow you to start a station or an entire program manually. To do so, turn the dial to Manual Single Station or Manual All Stations
I-Core Controller: Basic Start-up Programming
Irrigation professional Mike Madewell will walk you through programing the Hunter I-Core controller. In part one basic start-up programming, Mike will
I-Core Controller: Advanced Programming with Extended Features
In part two advanced programming and extended features, Mike will go through seasonal adjust, cycle and soak, delay between stations and configuration
I-Core Controller: Solar Sync Setup
This video teaches you how to connect, configure, and program a solar sync weather sensor with your I-Core controller. Installation of both the wired
I-Core Controller HFS Flow Sensor Set-up
In part three of the Hunter Flow-Sync Sensor setup, Mike will go through installing the sensor and setting up stations to be monitored, change overflow
Hunter X-Core Programming 2 of 2 : Multiple Programs and Additional Features
This video goes into the advanced features of programming an X-Core controller including setting multiple programs, system off setting, manual operation
Hunter X-Core Programming 1 of 2: Overview and Setting Up Program A
This segment goes over basic programming of the X-Core residential irrigation controller. Setting the current time and day, start times, run times, and
Hunter X-Core Solar Sync Sensor Installation and Setup
Hunter Technical Services shows you how to properly connect and program a Solar Sync sensor to an X-Core controller.
