Residential & Commercial Irrigation
Residential & Commercial Irrigation
Here are some common reasons why a pop-up sprinkler may stay stuck up: Debris in the pop up body The riser is damaged The riser seal is worn To fix this: Unscrew the body cap Pull out the sprinkler assembly Examine the parts Clean out debris Replace …
Over time general usage can cause riser seals to wear out, similar to the wiper blades on a car, they require replacement. The signs of this are usually heads that have riser stems stuck up after the operation, or excessive leaking around the riser seal …
Hunter manufactures an MP Gauge , this gauge can be used on all Hunter spray heads. Simply screw the Hunter nozzle of your choice onto the MP Adapters top thread, then apply the MP Adapter's bottom thread to the spray head's riser stem. MP Gauge includes: …
If your spray bodies are leaking water after the system (valve) is shut off, and the flow of water reduces over time, your heads are experiencing low head drainage. Low head drainage is where the lowest heads on the line weep the water in the pipe after …
If you have the most popular PGP model, there is a "blank" nozzle on the gray low-angle nozzle rack. Or you can simply remove the red nozzle and put some bubble gum in it, then re-install the nozzle. There are a couple ways to do this, but it's going to …
The distance of coverage for the MP Rotator is dependent upon incoming pressure. If you are not achieving the distance you desire, your incoming pressure may be too low to achieve the desired coverage distance. First, check if your valve has a flow …