Residential & Commercial Irrigation
Residential & Commercial Irrigation
A Hunter weather sensor or other micro-switch type weather sensors can be connected to the Pro-C. The purpose of this sensor is to stop automatic watering when weather conditions dictate. Connecting a Hunter “Clik” Weather Sensor with a P2C Controller …
The Pro-C is compatible with the Hunter Solar Sync. Solar Sync is a sensor system that will automatically adjust the Pro-C controller’s watering run times (based on changes in local climate condition) by using the Seasonal Adjust function. The Solar Sync …
NOTE: In the Start Times dial position, the numbers 1-4 do not represent stations. The numbers represent the program start times. Each program can start up to 4 times on the set days to water. One start time will activate all stations sequentially in that …
The Pro-C is compatible with the Hunter Solar Sync. Solar Sync is a sensor system that will automatically adjust the Pro-C controller’s watering run times (based on changes in local climate condition) by using the Seasonal Adjust function. The Solar Sync …
This feature uses numbered day(s) of the month for watering instead of specific days of the week (odd days: 1st, 3rd, 5th, etc.; even days: 2nd, 4th, 6th, etc.) When you want to program ODD or EVEN days to water, press the (-) button until you see …
… Turn the dial to the Water Days position. The display will show the last program selected ( A , B , or C ). You can switch to another program by pressing the PRG button. The controller displays currently programmed active day schedule information. You …
This feature is convenient if you want to have a more consistent watering schedule without having to worry about the day of the week or the date. The interval you select is the amount of days between watering including the water day. Turn the dial to the …
With the Pro-C controller in production for 23 years, we have continuously upgraded to accommodate the innovative features. Below, you will find every panel we manufactured for the Pro-C model, including the wifi replacement front panel. For information …
Repeat steps 2 and 3 for each station. After entering the run time for the highest station number, press the button once to review the total run time programmed for all stations. … Pro-C - Setting Station Run …
LCD Display Main Display: Indicates various times, values, and programmed information Year: Identifies current calendar year Month: Identifies current calendar month Day: Identifies current calendar day Start Time: Identifies selected program start time …
All necessary hardware is included for most installations. Use the hole at the top of the controller as a reference and secure a 1" (25 mm) screw into the wall. Note: Install screw anchors if attaching to drywall or masonry wall. Align controller with the …
The Pro-C controller is supplied with a base 4-station module. The Pro-C is also compatible with the EZ Decoder System (EZDS) for hybrid conventional and two-wire operations. Add a Pro-C Decoder Module (PC-DM) to enable control for up to 32 total …
The chart below indicates the maximum wire runs that can be used when installing Hunter AC solenoid valves with controllers. The example in the chart below demonstrates the most commonly used wire size for station control and ground wire ( e.g.,12 AWG = …
Connect a 9-volt alkaline battery (not included) to the battery terminals and place in the battery compartment in the front panel. The battery allows the user to program the controller without AC power. Watering will not occur without AC power. Since this …
Route a wire pair from the pump relay into the controller housing. Connect the pump common wire to the terminal slot “ COM ” (Common) and the remaining wire from the pump relay to the P/MV terminal slot. Relay holding current draw must not exceed 0.28 …
Valves currently watering will be shut off after the dial is turned to the SYSTEM OFF position for two seconds. All active programs are discontinued and watering is stopped. To return controller to normal automatic operation, simply return dial to the RUN …
The Standard Model Mini-Clik is sold and designed for hook up to 24 Volt irrigation controllers only. For wiring to 110V or 220V irrigation controllers, please consult your distributor or this factory. All wiring must conform to National Electrical Code …