Residential & Commercial Irrigation
Residential & Commercial Irrigation
Residential Rotors - Rotor Nozzle Installation Procedure …
Using the PRB, the regulator in the body will take incoming pressures of 55-100 PSI and reduce them down to 45 PSI. This provides the optimum nozzle pressure to deliver the correct size droplets to the landscape for maximum water efficiency. Please …
The easiest of the rotor pressure gauges to use, the Rotor Pitot Gauge (P/N 280100), has a tube placed directly in front of the primary nozzle stream for an accurate working pressure (dynamic) reading. This gauge will work on all Hunter rotor sprinklers …
The rotor staking kit is designed to stabilize the shrub rotor while installed above ground. This rotor accessory is predominately used on slopes, either with the lateral pipe on the surface or slightly below the surface. Full installation details are …
Hunter rotors have replaceable riser seals that may wear out over time. Sandy soils, sunken heads, or extremely hot and cold temperatures may also cause a seal to wear out prematurely.The riser seal is available as a single replacement part (P/N 181500) …
… Adjustable heads are preset to approximately 180 degrees. The PGP-ADJ is adjustable from 40-360 degrees. The PGP Ultra is adjustable from 50-360 degrees. Sprinklers may be adjusted with water on or off. It is recommended that initial adjustments be made …