Residential & Commercial Irrigation
Residential & Commercial Irrigation
Download the I-Core Owner’s Manual for detailed instructions on installation and programming an I-Core irrigation controller. … I-Core Owner's …
Note: If decoder(s) have not been installed on the two-wire path(s), the decoder output module will display “Line Open”. … Connecting the Two-Wire …
The DUAL decoder module has features and diagnostics to help you troubleshoot installation issues and check the status of solenoid operation. Basically, two functions are available to the user in the Diagnostic mode: Read Current Function Allows for real …
The Standard Model Mini-Clik is sold and designed for hook up to 24 Volt irrigation controllers only. For wiring to 110V or 220V irrigation controllers, please consult your distributor or this factory. All wiring must conform to National Electrical Code …
STEP ONE STEP TWO Before digging your hole make sure you’ve chosen a location that is not in the direct path of a rotor, this is in case the door is left open water doesn’t infiltrate the internal parts of the controller. Root intrusion can also pose …
These tables are designed for quick reference and are set up to provide maximum wire runs, given the information at the bottom of the table. Maximum one-way distance in feet between controller and valve heavy-duty solenoid: 24 VAC, 350 mA inrush current, …
Hunter controller's contain multiple sized transformers, therefore each controller has different activation capabilities. Here is a list of recommended applications when using multiple Hunter solenoids. Note: The max stations you see below for each …
The I-Core now has the Solar Sync software built into the controller. New I-Core controllers with built in Solar Sync are easily identified by the new Solar Sync Settings dial position on the facepack. Because the new I-Core has built in Solar Sync …
After Solar Sync has been installed and programmed, we recommend allowing the system to run for a few days at the initial setting. Because of the variety in site conditions (including sensor location, amount of direct sunlight available to the sensor, …
I-Core - Front Panel Replacement …
The Erase All feature will erase all of the controller's memory and set everything back to factory presets. Once you perform an Erase All , all programming will be erased, including the Easy Retrieve saved programming. Erase All is usually performed when …