Residential & Commercial Irrigation
Residential & Commercial Irrigation
Download the I-Core Owner’s Manual for detailed instructions on installation and programming an I-Core irrigation controller. … I-Core Owner's …
This is strongly discouraged by Hunter for the following reasons: It is unlikely that the pre-existing wire meets the specifications for gauge, twist, and solid copper. Pre-existing wire will not be color-coded correctly for the decoder wires. …
Controller power must be OFF when installing decoders in the two-wire path. Note: Decoder wire runs and connections must be completely waterproof. Decoder wiring is more critical than "conventional" 24 VAC solenoid wiring. Follow instructions closely! …
Wire and wire installation is a key factor in successful decoder installations. Substitution of recommended wire and wire splices is at the installer’s own risk and is a major cause of start-up service troubles. Hunter provides two types of wire for use …
The Erase All feature will erase all of the controller's memory and set everything back to factory presets. Once you perform an Erase All , all programming will be erased, including the Easy Retrieve saved programming. Erase All is usually performed when …
The Standard Model Mini-Clik is sold and designed for hook up to 24 Volt irrigation controllers only. For wiring to 110V or 220V irrigation controllers, please consult your distributor or this factory. All wiring must conform to National Electrical Code …