Devices allows setup of common external devices that the controller can use. The functions in the Devices menu are covered in more detail in other sections.
P/MV Operation
Set the Style, Normally Closed or Normally Open, for the Pump/Master Valve outputs. Pumps should always be set to Normally Closed to prevent damage. The P/MV Delay sets how long the P/MV will remain active if a station pauses, such as during the delay between stations. P/MV setup is covered in detail in the Pump/Master Valve section.
Flow Sensors
Flow Sensor setup is covered in detail in the Basic Programming, Sensors, and Flow Sensors section.
Solar Sync
Solar Sync setup is covered in detail in the Basic Programming, Sensors, and Solar Sync section.
Clik Sensors
Clik sensor setup is covered in detail in the Basic Programming, Sensors, and Clik Sensors section.
Sensor Response
Sensor Response is covered in detail in the Basic Programming, Sensors, and Flow Sensors section. A sensor response setting is required for any sensor to be able to shut off any program in the controller.
Still need help? We're here.
Tell us what you need support with and we'll find the best solution for you.