Pro-C: Set Station Run Times

The Pro-C supports run times from 0-6 hours for stations assigned to programs A, B, or C. You can also use a Water Budget setting on the Pro-C controller.

1. To set a run time, move the cursor to the arrow buttons next to the time, and hold down the left mouse button to dial up or down.
   
   Water Budget: With the Pro-C controller, you can use this setting to adjust your overall watering amount by season without adjusting run times individually. The water budget can be set from 10% to 150% in 10% increments. For example, in the rainy season, you can reduce watering by half by setting water budget to 50 percent. Every run time automatically will be reduced by half. Likewise, run times can be increased up to 50 percent during dry periods.
   
   Note: Even with water budgeting you cannot increase station run times beyond six hours. It is recommended that water budget be set a 100% for the downloaded program and then used on the controller to adjust for minor weather changes.
   
   
2. When your done, choose OK to save the watering schedule you’ve selected.

You can return at any time and change any of the run times you’ve set. To change the run times at a later time choose Setup, then Station Run Times (or press Alt-S-R).