Select Controller Model

Begin by specifying what controller model you’re scheduling. The SRP software supports three different types of controllers:

• Hunter SRC series of controllers
• Hunter Pro-C series of controllers
• Hunter ICC series of controllers

If you selected “Create a New Setup” the program will automatically take you through all the steps you will need to setup a complete program. If you would like to setup your controller in a different manner, you can click Cancel at any time to go to the main screen. To set up a schedule for an SRC, choose SRC, then model 600 (six-station) or 900 (nine-station). For the Pro-C, click on Pro-C, and then specify the number of stations, from 3 to 12. For the ICC, click on ICC, and then specify the number of station, from 8 to 48. When you’re done, choose OK. You’re now ready to set up a schedule for the controller model you’ve selected.

For instructions on setting up the SRC controller continue here.
For instructions on setting up the Pro-C controller continue here.
For instructions on setting up the ICC controller continue here.

Note: To switch to a different controller at another time choose Setup from the main menu, then Controller Model. When this is done a reference screen will appear on the screen prompting you to save your setup. See “Saving Your Watering Schedule”, for more information on how to save your setup.