Setting Station Run Times (Length of Watering for Each Area)

1. Turn the dial to the SET STATION RUN TIMES position.
2. The display will show the last program selected (A, B, or C) the station number selected, and the run time for that station will be flashing. You can switch to another program by pressing the button.
3. Use the or button to change the station run time on the display.
4. Press the button to advance to the next station.
5. Repeat steps 3 and 4 for each station.
6. You can set station run times anywhere from 0 to 99 minutes.
7. You can move between programs while staying on the same station. However, it is recommended that one program is completed before going on to the next program.

NOTE: Jumping between programs can be confusing and may result in program entry errors.

Setting Days To Water

1. Turn the dial to SET DAYS TO WATER.
2. The display will show the last program selected (A, B, or C). You can switch to another program by pressing the button.
3. The controller will display currently programmed active day schedule information. This dial position provides different watering options: choose to water on specific days of the week, or choose to water only on odd days or even days. Each program can operate using only one type of water day option.
   
   

Selecting Specific Days of the Week to Water

1. With the arrow cursor on a specific day (the cursor always starts with Sunday), press the button to activate a particular day of the week to water. Press the button to cancel watering for that day. After pressing a button the cursor automatically advances to the next day.
2. Repeat step 1 until all desired days have been selected. The selected days arrows will show on the display to indicate their status as ON. The last solid arrow is the last day of watering for that program.