Programming the Controller (Continued)

Setting Watering Start Times Turn the dial to the SET WATERING START TIMES position. The factory preset is set on program A. If necessary, you can select program B or C by pressing the button. Use the or button to change the start time. (The start times advance in 15 minute increments.) Hold either button down for 1 second to change times rapidly. Press the button to select the next start time, or press button for the next program.

NOTE: One start time will activate all stations sequentially in that program. This eliminates the need to enter each station’s start time. Multiple start times in a program can be used for separate morning, afternoon, or evening watering cycles.

Eliminating a Program Start Time

With the dial set to the SET WATERING START TIMES position, push the or button until you reach 12:00 am (Midnight). From here push the button once to reach the OFF position.

NOTE: If a program has all four-start times turned off, then that program is off. (All other program details are retained). Because there are no start times, there will be no watering with that program. This is a convenient way to stop watering on one program only without turning the dial to the OFF position.