One Touch Manual Start and Advance

You can also activate all stations to water without using the dial.

1. Hold down the button for 2 seconds.
2. This feature automatically defaults to program A. You can select program B or C by pressing the program.
3. The station number will be flashing. Press the button to scroll through the stations and use the or button to adjust the station run times. (If no buttons are pressed for a few seconds during step 2 or 3, the controller will automatically begin watering.)
4. Press the button to scroll to the station you wish to begin with. After a 2 second pause, the program will begin.

This feature is great for a quick cycle when extra watering is needed or if you would like to scroll through the stations to inspect your system.