Manually Run All Stations

  1. Turn dial to MANUAL-ALL STATIONS.
  2. Select program A, B, or C by pressing the button.
  3. Press the button until desired starting station is displayed.
  4. Station run time will flash in the display. Use the or button to select the amount of run time for the station to water if different from the run time displayed.
  5. Use the button to move to the next station.
  6. Repeat steps 3 and 4 to customize each station if desired.
  7. Press the button until you reach the station that you would like watering to begin.
  8. Return dial to AUTOMATIC (program will water the entire program beginning with the station number last left in the display, then controller will return to automatic mode with no change in the previously set program).

NOTE: The station that is on the display when you turn the dial to AUTOMATIC will be the first station to run. The controller will then proceed to water in sequential order only. It will not water previous stations. Example: If you turn the dial to AUTOMATIC with the display reading station 3, the controller will water stations 3 through 6 in the program, but not return to stations 1 and 2.