Mounting the Indoor Controller to Wall

NOTE: The indoor EC is not water or weather resistant, and must be installed indoors or in a protected area.

1. Select a location as close as possible to a standard electrical outlet, one that is not controlled by a light switch. The location should be protected from moisture and direct sunlight.
2. Place the controller at eye level. Use the hole at the top of the controller as a reference and secure one 25 mm screw (A) into the wall. Note: Install screw anchors if attaching to drywall or masonry wall.
3. Align controller with the screw and slide the keyhole (B) on top of the controller over the screw.
4. Secure controller in place by installing screws in the holes (C) below the terminal strip area.

NOTE: Do not plug transformer into power source until the controller is mounted and all valves have been connected.