Hunter Industries - The Irrigation Innovators
Mini-Clik Specifications
Mini-Clik® MODELS
MINI-CLIK – standard Mini-Clik model
MINI-CLIK-HV – code approved for liquid tight electrical fittings
for 120 or 240 volt wiring applications
MINI-CLIK-C – 1/2" female threaded inlet at bottom
MINI-CLIK-NO – normally open switch
MINI-CLIK-C-NO – 1/2" female threaded inlet at bottom, normally open switch

DIMENSIONS
• Height: 5"
• Length: MINI-CLIK: 6"
MINI-CLIK-HV: 7 1/2"

OPERATING SPECIFICATIONS
• Switch Rating: 5 amps, at 125/250VAC
• Wiring:
MINI-CLIK and MINI-CLIK-C: Typically interrupts the common ground wire between the solenoid valves and the controller
MINI-CLIK-HV: For use with high voltage irrigation systems, and systems using pumps drawing less than 10 amps peak
MINI-CLIK-NO: for use with controllers that require a normally open sensor switch
• Included: 25 ft. of #20 two conductor wire, two mounting screws, controller identification label and detailed instructions
• UL listed
• Optional metal gutter mount for Mini-Clik (order SGM)
SPECIFICATION GUIDE
EXAMPLE: MINI-CLIK - HV
MODEL
MINI-CLIK		 OPTION
HV = High Voltage Model for 110/220VAC Applications
C = Conduit Mount
NO = Normally Open Switch
Note: For Mini-Clik in Sensor Guard enclosure, specify SG-MC.
To add Bypass Switch Box to any non-Hunter controller
installation, specify BPSW with sensor. Bypass switch function
is standard in Hunter SRC, Pro-C, and ICC controllers.
SGM = Optional Gutter Mount